Waxness Wax Necessities Cartridge Wax Heater WX1-C

Description

*Wax Cartridge not included

Technical specifications:
Voltage : 110V -220V
Frequency : 50Hz/60Hz
Power : 40W
Volume : 1pcs*100G
Max Temperature :100 oC
Non adjustable temperature
Shell material : ABS
Inner material : Aluminum
Warranty 1 year
Fits standard cartridges with the following measurements:
Height: 13.5 cm / 5.31 inch
Length: 5.5 cm /2.16 inch
Width: 2.25 cm / 0.88 inch
Wax Necessities WX-C1 Wax Cartridge Heater.
Ideal for use with all Wax Necessities soft wax cartridges,
the WX-1C heater offers a simple and reliable service. On
the exterior the heater is molded in a highly resistant APS
thermoplastic plastic resin. and aluminium is used for the
quality inner construction.
To prolong the life and elficiency of the warmer, it is
recommended a Wax Necessities soft wax cartridge always
be inserted into the heating chamber. Never pour wax
directly into the heating well.
To maintain optimum condition of the heater, clean regularly.
Use Wax Necessities Citrus Cleaner for heavy wax residues.
Do not use Citrus Cleaner directly on the `Wax Necessities`
LOGO printed on the heater.
Your warmer has been tested before leaving the factory and is 
 guaranteed against all manufacturing defects, under normal 
 use, for 12 months from date of purchase. If the heater will fail 
 to operate due to defect in material or workmanship, we will 
 repair or replace it with date proof of purchase. Guarantee does 
 not apply to damaged lids or heater resulting from misuse or accident.
INSTRUCTIONS FOR USE
Remove the heater lid and
place the wax cartridge
directly into the heating
chamber
(We recommend Wax
Necessities cartridges).
Plug in the appliance. Red
light indicates power is on.
The indicator light will
remain illuminated during
operation time.
Please allow 10-30 min,
depending of the ambient
temperature until the wax
is ready to use.
To ensure the wax has
reached a suitable tem-
perature and to avoid loss of
profitable working time, it is
recommended to plug in the
heater approximately one
half hour before services
begin.
Unplug and cover unit
loosely with lid when not in
use.
Caution: Locking lid tightly
may cause lid to break. If lid
adheres to melting pot,
pre-heat the warmer prior to
lid removal to prevent lid
from cracking.
Recommended Wax Necessities cartridges.
A WARNING
HEATER AND WAX ARE GETTING HOT.
ALWAYS TEST WAX ON A SMALL AREA
OF SKIN PRIOR TO APPLICATION.
Ideal for all Wax Necessities Cartridges
3.4 oz
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the heater!
When using electrical appliances, basic safety precautions
should be followed
WARNING
To reduce risk ofburns, fire, or Injury:
Always test wax on small area of
the skin before application.
Do not touch the metallic surfac-
es of the warmer. Unit is hot
when in use.
Use only on a flat, solid, surface.
Do not plug-in unit where power
cord can be tripped on or where
cord hangs over edge of working
table and can be pulled off.
Do not leave unit on unattended.
If wax begins to smoke, unplug
unit immediately and have
checked by electrician.
AlIow unit to cool before,
cleaning or storing.
Do not leave children unattended
around working heater. Use unit
only for the intended use as
described in this booklet.
For best results, also refer to
Wax Necessities waxing
instmctions and instructions on
the product package.
DANGER
To reduce risk of electrocution: (which can result in Injuries 8. death)
Unplug the heater immediately
after use.
Do not use in bathrooms or on
wet floors and surfaces.
lf unit falls into water, unplug
immediately.
Do NOT reach Into water.
Never operate heater if it has a
damaged power cord or plug. if
it is not working properly. or has
been dropped or damaged.
DO not connect more than 3
heaters on an extension cord.
For professional use only!